3.5 INCH LIFT KIT TOYOTA TACOMA 2WD/4WD With Leaf Springs

This kit features a set of high-quality, light weight, forged aluminum UpperControl Arms designed to make alignment adjustments easier and Clevite rubberbushings for enhanced durability. These arms are designed to promote afactory-like geometry by keeping the ball joint at optimum angles after lifting.This design allows for an improved, greater range of motion from theball-joint, with less stress, wear and tear.

Rough Country’s 3.5-inch Bolt-On Kit features N3 Nitrogen-charged shocks,giving your truck incredible ride-quality both on and off-road. Also includedare a set of loaded N3 struts and fabricated rear leaf springs to provide liftheight from front to rear. Once installed, this kit gives your truck plenty ofride height for larger tires while offering a clean, level look from front torear.

This all-inclusive kit comes with everything you need, and installation is apiece of cake compared to other kits on the market! Featuring a 100% bolt-oninstallation process that requires minor cutting and drilling. This kit can beinstalled using common tools in a home garage, and allows the truck to bereturned to stock at any time if so desired. Best of all this kit featuresRough Country’s Lifetime Replacement Warranty.

FEATURES

• Easy installation.
• Increased ground clearance.
• Maintains factory ride quality.
• Levels the front with the rear of the vehicle.
• Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
• Rear springs minimize axle wrap.
• Rough Country's rear springs are an excellent option to replace worn out factory springs.

OPTIONAL N3 LOADED STRUTS

·Includespre-loaded coil

·Maintainssmooth, factory-like ride

·Increasedground clearance

·Engineeredfor lifted applications

·InfinitelyVariable Damping

·Leak-proofpiston seal

·Massive1 3/8in Bore

·Silverpowder coat finish

·3-yearManufacturer's Warranty

OPTIONAL V2 MONOTUBE SHOCKS

·Monotubedesign

·Internalfloating piston

·Nitrogen-charged

·46mmhigh-flow piston

·Fastheat dissipation

·36kNTensile Strength

·Mountsinverted

·T6061brushed aluminum body

·3-yearManufacturer's Warranty

OPTIONAL VERTEX

·8-StageAdjustable Damping

·MonotubeDesign

·Nitrogen-charged

·Massive2.5in Piston

·22mmChrome-Hardened Piston Rod

·3-StageSeal System

·Heat-Treated,Alloy Bearing

·HonedSteel Body

·3-yearManufacturer's Warranty

NOTES- IMPORTANT

• Requires minor cutting.
• Does NOT fit models with 5 lug wheels.
• Does NOT fit T/X Baja models.
• Does NOT fit XSP-X models.
• Does NOT fit PRO Series models.