Build-Your-Own 1UZ, 2UZ & 3UZ Swap-Mount Fit-Kit
Custom engine installations can require exact – and particular – engine placement. For those builders who want to position the engine forward, backward, left, right, up or down, NWT has your solution: a modular engine-mount kit.
We’ll do the hard work of tooling, cutting and shaping the engine and frame plates as well as the laterals and gussets, and we’ll source the correct bushings and bolts for you. All you’ll need to do is hang that engine in place, bolt up the plates, and weld in the laterals and gussets as you see fit – key word “fit”. This kit includes the CNC-cut engine and frame plates, bushings, nuts, bolts and washers. Also specify the original engine and chassis (such as 22RE, 3VZ or 5VZ, 3RZ, second-generation 4Runner, FJ40, etc).
Note #1: You’ll be accountable for your decisions on what goes where with this kit – NWT only warranties the quality and fit of the unassembled parts. If you’re not an experienced welder, NWT suggests you have a competent fabricator check your work post-facto.
Note #2: The swap-mount fit-kit is configurable for custom or specialized body and engine combinations, so call and ask us about your setup.