{"product_id":"toyota-diesel-2l-2lt-1997-2001-cylinder-head-replacement-package","title":"Toyota Diesel 2L \/ 2LT 1997-2001 Cylinder Head Replacement Package","description":"\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis package bundles the four parts you actually need to take a cracked, warped, or gasket-blown 2L \/ 2L-T 2.4L diesel head off and put a reliable one back on in one order instead of four separate sourcing trips. It's built around the new AMC complete cylinder head (the direct equivalent of Toyota OEM 11101-54170) for 1997-2001 Hilux and HiAce, paired with the matched OEM head gasket and engine overhaul gasket kit, a full ARP head stud set to replace Toyota's single-use factory TTY bolts, and a fresh set of four OEM glow plugs that are already exposed and easy to replace while the head is off.\u003c\/p\u003e\n\u003cp\u003eToyota 2L-T owners researching this job on forums consistently land on the same root cause for repeat head failures: factory torque-to-yield bolts lose clamping force after one torque cycle, and reusing them, or reinstalling them against a gasket surface that was never checked for flatness.  This is why a \"fixed\" head cracks or blows its gasket again within a season. This package is assembled to break that cycle: a new, uncracked casting; reusable studs instead of one-time bolts; gaskets sized to the correct revision; and glow plugs replaced while labor is already sunk into opening the engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eOEM \/ Reference Part Number\u003c\/th\u003e\n\u003cth\u003eQty\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNew AMC Complete Cylinder Head (assembled, with valves \u0026amp; valve springs)\u003c\/td\u003e\n\u003ctd\u003e11101-54170 \u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHead Gasket \u0026amp; Engine Overhaul Gasket Kit\u003c\/td\u003e\n\u003ctd\u003e11115-54084 (F0) head gasket + overhaul kit\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eARP Head Stud Set (replaces OEM TTY head bolts)\u003c\/td\u003e\n\u003ctd\u003eARP2000 alloy studs — replaces Toyota 90910-02080 \/ -02081 \/ -02112 bolt applications\u003c\/td\u003e\n\u003ctd\u003e1 set (18 studs, washers \u0026amp; nuts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Glow Plug Set\u003c\/td\u003e\n\u003ctd\u003e19850-54090\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: This head is a cast-iron, assembled casting. The ARP stud set is sold elsewhere on our site across several Toyota diesel engine families (2L\/2L-T, 2L-TE, 3L, 5L, 1KZ-TE); the thread spec and 18-stud bolt pattern are shared across that family, but if your block has ever been machined or re-tapped outside factory spec, confirm stud length and thread fit before final torque. Toyota's published OEM bolt numbers span multiple engines in that same family — if you need the exact bolt number this stud set supersedes for your specific 2L\/2L-T application, email us your engine code, and we'll confirm before you order.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"padding-left: 1.5em; margin: 0;\"\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003e\n\u003cstrong\u003eOne sourcing event, not four:\u003c\/strong\u003e Head, gaskets, studs, and glow plugs arrive together, so a head-off job doesn't stall waiting on a second or third supplier.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003e\n\u003cstrong\u003eBreaks the repeat-failure cycle:\u003c\/strong\u003e New casting plus reusable ARP studs removes the two most common causes of a 2L\/2L-T head needing to come off twice.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003e\n\u003cstrong\u003eMatched gasket revision:\u003c\/strong\u003e The head gasket and overhaul kit are sourced and sold together, so you're not guessing whether a standalone gasket listing matches your overhaul kit's revision.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003e\n\u003cstrong\u003eClamping force that survives heat cycling:\u003c\/strong\u003e ARP2000 studs (220,000 PSI tensile) hold torque through repeated thermal cycles in a way Toyota's factory torque-to-yield bolts cannot.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003e\n\u003cstrong\u003eCold starts handled while you're already in there:\u003c\/strong\u003e Glow plugs are easy to reach with the head off and cheap relative to a second teardown — this package replaces all four rather than leaving them for a future repair visit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-indent: -1.5em;padding-left: 1.5em;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Type:\u003c\/strong\u003e Multi-component cylinder head replacement package (head, gasket set, head studs, glow plugs)\u003cbr\u003e\u003cstrong\u003eEngine Compatibility:\u003c\/strong\u003e Toyota 2L 2.4L (2,446cc) SOHC naturally aspirated diesel \/ 2L-T 2.4L SOHC turbo diesel\u003cbr\u003e\u003cstrong\u003eHead Material:\u003c\/strong\u003e Cast iron head and valve seats, SOHC, 8 valves (matches Toyota factory spec)\u003cbr\u003e\u003cstrong\u003eBore x Stroke:\u003c\/strong\u003e 92mm x 92mm\u003cbr\u003e\u003cstrong\u003eCompression Ratio:\u003c\/strong\u003e approx. 22.3:1 (2L naturally aspirated) \/ approx. 20.0:1 (2L-T turbo)\u003cbr\u003e\u003cstrong\u003eHead Stud Material:\u003c\/strong\u003e ARP2000 proprietary alloy steel, 220,000 PSI tensile strength, black oxide finish — 18 studs, parallel-ground washers, 12-point nuts, ARP Ultra-Torque lubricant included\u003cbr\u003e\u003cstrong\u003eGlow Plug Specs:\u003c\/strong\u003e 11V (operates on 12V systems), M10 x 1.25mm thread, 90.4mm overall length, approx. 7-second heat-up, 10-18 Nm (7-13 ft-lbs) tightening torque\u003cbr\u003e\u003cstrong\u003eHead Gasket Material:\u003c\/strong\u003e Composite construction, 0.527kg (1.16 lbs), F0 revision\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eHilux\u003c\/td\u003e\n\u003ctd\u003e2L 2.4L diesel \/ 2L-T 2.4L turbo diesel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eHiAce (H100 series)\u003c\/td\u003e\n\u003ctd\u003e2L 2.4L diesel \/ 2L-T 2.4L turbo diesel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eDyna 100 \/ 150\u003c\/td\u003e\n\u003ctd\u003e2L 2.4L diesel (select models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eImportant — verify before ordering:\u003c\/strong\u003e Toyota reused the 2L\/2L-T engine code across multiple cylinder head castings and nearly two decades of production. This package is built around head casting 11101-54170, correct for the 1997-2001 window above — it is \u003cstrong\u003enot\u003c\/strong\u003e interchangeable with the earlier 11101-54111, -54120, -54050, or -54121 castings, and it does \u003cstrong\u003enot\u003c\/strong\u003e fit the fuel-injected 2L-TE, the 3L (2.8L), or the 5L (2.986L). The ARP stud set's own standalone listing shows a confirmed year range of 1980-1997 for 2L\/2L-T applications; the thread spec and bolt pattern are shared across the engine family, but since our records don't show an independently confirmed 1998-2001 data point for this specific stud set, email us your engine code before ordering if your truck falls in that later window, and we'll confirm fit. Confirm your exact engine code and chassis code against your VIN plate or a current Toyota Parts Online lookup before ordering. If you're unsure, email a photo of your VIN plate and engine code to sales@northwesttoysllc.com, and we'll confirm fitment before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Difficulty:\u003c\/strong\u003e Expert \/ Professional\u003cbr\u003e\u003cstrong\u003eTools Required:\u003c\/strong\u003e Torque wrench (minimum 90 ft-lb capacity), 12-point deep socket for ARP nuts, thread chaser (not a tap) for the block deck, feeler gauges and shims for valve clearance, straightedge for head\/deck flatness verification (max warpage per Toyota spec), engine hoist or support, 12mm socket for glow plugs, radiator pressure tester for post-install leak check\u003cbr\u003e\u003cstrong\u003eProfessional Installation:\u003c\/strong\u003e Strongly recommended. This job combines precise ARP stud torque sequencing, valve clearance adjustment, and head-gasket surface verification in one service — mistakes in any one of the three undo the benefit of the other two.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance Tips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"padding-left: 1.5em; margin: 0;\"\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eChase the block's stud threads before installation — never re-tap them — and use only ARP's Ultra-Torque lubricant on the studs, not engine oil or anti-seize.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eTorque ARP nuts in staged passes (commonly 30\/60\/90 ft-lbs in Toyota's factory sequence) and confirm the final spec against ARP's current installation instructions before exceeding 100 ft-lbs.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eHave the head surface-checked for flatness before installation, even on a new casting — shipping and handling can occasionally introduce minor warp.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eInstall glow plugs last, snug by hand or with a torque wrench to 10-18 Nm — never with an impact wrench, which can crack the ceramic element or strip the thread.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eBleed the cooling system fully after reassembly and pressure-test it; trapped air and a slow leak are two of the most common causes of a comeback overheating complaint on these engines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-indent: -1.5em;padding-left: 1.5em;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What exactly comes in this package?\u003c\/strong\u003e\u003cbr\u003eA: You receive one new AMC complete cylinder head equivalent to Toyota OEM 11101-54170, one head gasket and engine overhaul gasket kit (OEM 11115-54084 head gasket plus overhaul kit), one 18-stud ARP head stud set with nuts, washers, and assembly lubricant, and one set of four OEM 19850-54090 glow plugs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why does this package use ARP studs instead of new OEM head bolts?\u003c\/strong\u003e\u003cbr\u003eA: Toyota's factory 2L\/2L-T head bolts are torque-to-yield (TTY) fasteners designed for a single installation — they stretch permanently when torqued and lose clamping force if reused, which is a well-documented contributor to repeat head gasket failure on this engine family. ARP2000 studs are reusable and hold clamping force through repeated heat cycling, which is why this package substitutes them for the factory bolt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this package fit my 1997-2001 Hilux or HiAce without further checking?\u003c\/strong\u003e\u003cbr\u003eA: It's built for the 2L\/2L-T as produced in that window, using head casting 11101-54170. Toyota revised this head casting several times across the broader 2L\/2L-T production run, so if your truck's head has previously been swapped to a different casting, or you're not certain whether you have the 2L or 2L-T variant, confirm your engine code against your VIN plate before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: My truck is a 2L-T but not a Hilux or HiAce — will this still work?\u003c\/strong\u003e\u003cbr\u003eA: Possibly, but it isn't confirmed. This package's gasket and head numbers are verified for Hilux, HiAce, and Dyna 100\/150 in the 1997-2001 window. Other 2L\/2L-T applications may use a different head casting or gasket revision. Email your VIN or engine code, and we'll confirm before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How difficult is this installation, realistically?\u003c\/strong\u003e\u003cbr\u003eA: Expert-level. This isn't a bolt-on part swap. It involves removing and reinstalling a diesel cylinder head with correct torque sequencing on both the ARP studs and the surrounding hardware, valve clearance adjustment, and a flatness check on the mating surfaces. Forum consensus among 2L-T owners who've done this job themselves consistently recommends either prior diesel engine rebuild experience or professional installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why are glow plugs included in a cylinder head package?\u003c\/strong\u003e\u003cbr\u003eA: They're already exposed once the head is off, and they're inexpensive relative to a second teardown later. Replacing all four while the head is already open avoids a future repair visit for a part that fails independently of the head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Toyota Parts You May Need\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"padding-left: 1.5em; margin: 0;\"\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eTiming Belt Kit — the 2L\/2L-T uses a rubber timing belt, not a chain; replace it while the front of the engine is already apart.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eWater Pump — a clogged or failing water pump is a documented contributor to the overheating that cracks 2L-T heads in the first place; cheap insurance against a repeat failure.\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eThermostat \u0026amp; Housing Gasket — inexpensive to replace while the cooling system is already open for bleeding.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eValve Clearance Shim Set — needed if clearances fall outside spec during the post-install adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-indent: -1.5em;padding-left: 1.5em;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Symptoms That Point to a Full Head Replacement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul style=\"padding-left: 1.5em; margin: 0;\"\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eWhite smoke from the exhaust, especially on cold start or under load\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eCoolant disappearing with no visible external leak\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eMilky or foamy oil on the dipstick or filler cap\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eOverheating that returns shortly after topping off coolant\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eBubbling or gurgling in the radiator or overflow tank with the engine running\u003c\/li\u003e\n\u003cli style=\"text-indent: -1.5em; padding-left: 1.5em;\"\u003eHard cold starts with heavy white smoke, often paired with a worn glow plug warning sign\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"North West Toys","offers":[{"title":"Default Title","offer_id":50758214582320,"sku":"574008","price":3320.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/3199\/2624\/files\/574008.png?v=1791431314","url":"https:\/\/northwesttoysllc.com\/products\/toyota-diesel-2l-2lt-1997-2001-cylinder-head-replacement-package","provider":"North West Toys","version":"1.0","type":"link"}